What sort of flat is considered a corner apartment?

A corner apartment is located at the end of the building: this is, a part of its walls are not adjacent to the neighbors, but are the domikday.ru outer walls of the home.

There can be one flat at a corner flat – it occupies the entire end of the house, it is also known as a corner flat. Or 2 – that the windows of one overlook the street, the second – the yard. Depends on the building plan, the layout of the premises.

There’s also a”different caste” – housing with walls from the expansion joints. These”gaps” between entrances are ordinarily made in multi-story buildings, the principal task of the created unit – to break the deformation forces during the shrinkage of this construction, in the event of emergencies. Pros and cons of both corner apartments in the joint are somewhat different from the normal ones with access to this road – we will pay special attention to this subject in the last section.


Because the 2-3 sides of this space is outside, in winter it’s 3-5C colder, and in summertime on the opposite – warmer. Particularly if the end of the house is heated by sunlight. In some cases, the difference reaches 10C – but such a distinction is unacceptable, suggests that a problem with the exterior the home – most probably have to speak to the management company, asking (or forcing) to fulfill their direct duties, to patch the cracks shaped.

Corner flat in a brick home with thick walls is more comfortable. Such risks aren’t exposed – the thickness of the wall acts as a buffer, so not allowing overheating, overcooling.


When a room has only one wall united with the road, it generally has sufficient room heat to prevent freezing and condensation. But when there are two outdoor partitions, and they’re adjacent – there is a higher probability of freezing at the corner, the creation of condensation in it, and thus – mold, fungus. Their spores not only spoil the overall look of the space, but also lead to the appearance, complication of several serious ailments.

Important! The problems of corner location are justified when the factors are related – overly low temperature from heating batteries together with dampness is sure to result in moldy walls.