How to Paste wallpaper at the corners: instructions, gluing outer, inner corner, docking

Step-by-step directions for gluing inner corners

When completing, the most important problem can be uneven walls as well as the resulting springs on the wallpaper. It is also required to take into account that as soon as the walls are crooked, the joints of background canvases may diverge.

After gluing the previous one in the front of the interior corner of the fabric must measure the remaining space. It’s measured from the edge of the glued cloth to the adjacent wall, the resulting figure is inserted 10-15 millimeters. If the walls are extremely curved, then the extra figure may be .

Cut a strip equivalent to the resultant figure, taking into account the allowance. The surfaces have been treated with adhesive. Based on the form of coat it may be exactly the wall or both surfaces.

The strip is then glued individually using the cut side to the wall. The background should go on the opposite airplane.

If the glued wallpaper is sterile, then you need to make several little cuts perpendicular to the folds.

Level or incline on the adjoining wall is a perpendicular lineup. The distance from the corner is equivalent to the width of the previous cut strip, not adding developments.

The surfaces have been smeared with adhesive, and the coat is glued into the wall using the flat side to the marked line. The cut goes on the adjoining wall.

How to glue the outer corner (outer corner)?

Protruding corner should be glued by analogy with an interior, however there are little gaps, which also have to be taken into account when working.

Measured the space remaining from the glued wallpaper into the adjoining wall. Add 20-25 millimeters to the got figure.

A segment is cut away, taking into account the added 20-25 millimeters.

Prior to gluing, the surfaces have been treated with glue.

The even edge must be glued into the wallpaper already fixed on the wall, the own cut facet”goes” into the next plane. If needed, small cuts are created in the place of going to another wallpaper, smoothed and pushed into the wallsocket.

Draw a vertical strip onto the adjacent wall at a distance of just glued cut strip plus 6-10 millimeters.

After applying the adhesive, the strip is then put on the wall using its flat side to the marked line, moving over the edge of the glued strip.

The joints are smeared with adhesive and ironed using a rollercoaster. After that, the top layer is cut along the ruler and the two layers are combined together.